Trouble Logging In OS 10.5.*

[clifford.hubbard]

Scored Remoter VNC last night.cant seem to log onto Mac Mini. help please. attached are screen shots.
thnks
Cliff

photo(3).PNG (107.49 KiB) Viewed 9812 times

photo(3).PNG (107.49 KiB) Viewed 9812 times

[raf]

Thanks for the screenshots!

The problem is that you're on 3G. You need to be on WiFi (and the same WiFi as your mini) to connect using the local IP address. To connect from 3G (or anywhere on the internet) you have two options:
1- Follow the guides, and help from the forum: This means configure your router to forward port 5900 to your mini. And get a dyndns hostname.
2- Wait a couple of weeks for Remoter 2.6 (may end up calling 3.0), and get Remoter Complete (or an add-on). As this version will allow you to connect from the internet without you having to mess with your router, or dyndns.

Raf.

Edit: fixed spelling of dyndns

[clifford.hubbard]

I scored a hostname. Will try to search the posts for info on my router.
Thanks
Cliff

[clifford.hubbard]

Raf
i have had success following instructions on this sight and others. i was able to connect via 3g yesterday. but cannot today. attached are pix of iphone and mac mini.
thoughts? i have also loaded dyndns ip updater in addition to a host name created through dyndns
thanks
cliff

[raf]

Hi cliff!,
Make sure your Mac's ip hasn't changed. If you're using DHCP, your IP might change every time you wake your computer up, or reboot. You can avoid that by assigning the IP manually on the Mac. Or if your router supports it, by having the router assign you always the same IP based on the Mac's hardware address.

Raf.

[clifford.hubbard]

RAF
Does the dyndns ip updater take care of this?
Will look at the ip address.
Thanks
Cliff

[raf]

No, dyndns takes care of your public IP address. I'm referring to your Mac's private IP; the one your router is redirecting traffic to. If it changes, the router port forwarding stops working.

Raf.

[clifford.hubbard]

RAF
Now running 10.6.8. Can log on using local wifi. However using g3, I can establish connection,
But it eventually times out. Ip addresses look ok, as well as router ports.
Since upgrading to 10.6 this has been the problem.
Any thoughts are greatly appreciated.

Cliff

[raf]

RAF
Now running 10.6.8. Can log on using local wifi. However using g3, I can establish connection,
But it eventually times out. Ip addresses look ok, as well as router ports.
Since upgrading to 10.6 this has been the problem.
Any thoughts are greatly appreciated.

Cliff

Please try disabling "Connection Heartbeat" in the "Remoter Config" screen. Hope this helps!

Raf.

[clifford.hubbard]

disabled heartbeat. connection established. still seems to hang up. any other thoughts?
thanks
cliff